Charles Explorer logo
🇨🇿

Beam tests of an integrated prototype of the ATLAS Forward Proton detector

Publikace na Matematicko-fyzikální fakulta |
2016

Tento text není v aktuálním jazyce dostupný. Zobrazuje se verze "en".Abstrakt

The ATLAS Forward Proton (AFP) detector is intended to measure protons scattered at small angles from the ATLAS interaction point. To this end, a combination of 3D Silicon pixel tracking modules and Quartz-Cherenkov time-of-flight (ToF) detectors is installed 210m away from the interaction point at both sides of ATLAS.

Beam tests with an AFP prototype detector combining tracking and timing sub-detectors and a common readout have been performed at the CERN-SPS test-beam facility in November 2014 and September 2015 to complete the system integration and to study the detector performance. The successful tracking-timing integration was demonstrated.

Good tracker hit efficiencies above 99.9% at a sensor tilt of 14 degrees, as foreseen for AFP, were observed. Spatial resolutions in the short pixel direction with 50 mu m pitch of 5.5 +/- 0.5 mu m per pixel plane and of 2.8 +/- 0.5 mu m for the full four-plane tracker at 14 degrees were found, largely surpassing the AFP requirement of 10 mu m.

The timing detector showed also good hit efficiencies above 99%, and a full-system time resolution of 35 +/- 6 ps was found for the ToF prototype detector with two Quartz bars in-line (half the final AFP size) without dedicated optimisation, fulfilling the requirements for initial low-luminosity AFP runs.